Kraft Tool Co. ® Dealer Source
The Purchasing Portal for Distributors and Retailers
Press Room  |   Manuals   |   International  |   Retail Site
800-422-2448     SalesOrders@KraftTool.com

8" x 8" 1/2"R, 7/8"D Stainless Steel Walking Groover without Bracket

8" x 8" 1/2"R, 7/8"D Stainless Steel Walking Groover without Bracket
SKU: CC022-01

Strong groover cuts clean, smooth professional control joints every time. Made from high quality #18 gauge stainless steel. Both sides of the groover are curved up to avoid any gouging while in use. The tool creates a groove in wet cement to control expansion and contraction and relieve stress points. The 8" groover features a 1/2" radius and is 7/8" deep. The single-piece formed groove provides a smooth professional finish. The closed end groover bit eliminates possible build up within the tool. Each Groover is made from hand polished stainless steel that won't rust for an extra smooth working surface. The rivet free design combines an 8" wide groover base, and top plate electronically welded together providing strength to move through concrete. Four bolts protrude from the base to accept a 4-hole bracket of the user's choosing. The Kraft Tool Co.® EZY-Tilt® II Bracket (#CC294) is recommended. Proudly made in the USA.

  • Strong #18 gauge brush stainless steel
  • Makes 7/8 In. deep groove
  • Creates 1/2 In. radius to prevent chipping of concrete
  • Turned up sides to move smoothly through concrete
  • Cuts control joints in concrete
  • Single-piece bit for clean grooves
  • Closed bit prevents build-up in tool
  • Reinforced back plate for strength
  • Rivet free blade for a smooth finish
  • Works with 4-hole brackets
  • EZY-Tilt® II Bracket (CC294) is recommended
  • Made in the USA
Products specifications
NameValue
Length8.0000
Width8.0000
Thickness0.096
Blade MaterialStainless Steel
Blade TypeGroover
Bracketwith O
Bit Depth7/8"
Radius1/2"
Blade Length8"